Thread: No CPU temps in sensors-applet

ok motherboard amd 790x series made gigabyte, model ga-ma790x-ud4p. cpu model amd phenom ii x4 940. when run sensors-detect , enter yes this:

to load needed, add /etc/modules:

#----cut here----
# chip drivers
# no driver amd k10 thermal sensors yet
#----cut here----

want add these lines automatically? (yes/no)yes

seems nothing. noticed says no drivers there, how can install them manually? or not exist? sensors hard drive. please help!

there fix, need k10temp module code here. put in it's own folder named k10temp_module. rename downloaded file k10temp.c makefile... here 1 prepared earlier

code:

obj-m += k10temp.o : 	make -c /lib/modules/$(shell uname -r)/build m=$(pwd) modules clean: 	make -c /lib/modules/$(shell uname -r)/build m=$(pwd) clean

save makefile , put in same directory k10temp.c

next file need install file module, here 1 whipped earlier...

code:

#!/bin/sh install -m 644 k10temp.ko /lib/modules/`uname -r`/kernel/drivers/k10temp.ko /sbin/depmod -a

name install.sh , put in same directory k10temp.c

ready...
install build-essential

code:

sudo apt-get install build-essential

then install relevant kernel headers, use uname -r sort out headers have

code:

sudo apt-get install linux-headers-`uname -r`

now can build module... navigate k10temp_module directory in terminal , type make
make kernel module, if goes should similar following:

code:

make -c /lib/modules/2.6.28-15-generic/build m=/home/dave/kernel_modules/k10temp modules make[1]: entering directory `/usr/src/linux-headers-2.6.28-15-generic'   cc [m]  /home/dave/kernel_modules/k10temp/k10temp.o /home/dave/kernel_modules/k10temp/k10temp.c: in function ‘k10temp_update_device’: /home/dave/kernel_modules/k10temp/k10temp.c:54: warning: unused variable ‘tmp’ /home/dave/kernel_modules/k10temp/k10temp.c: in function ‘show_temp’: /home/dave/kernel_modules/k10temp/k10temp.c:91: warning: unused variable ‘place’ /home/dave/kernel_modules/k10temp/k10temp.c:90: warning: unused variable ‘core’ /home/dave/kernel_modules/k10temp/k10temp.c: in function ‘k10temp_probe’: /home/dave/kernel_modules/k10temp/k10temp.c:150: warning: label ‘exit_free’ defined not used /home/dave/kernel_modules/k10temp/k10temp.c:115: warning: unused variable ‘temp’ /home/dave/kernel_modules/k10temp/k10temp.c:114: warning: unused variable ‘scfg’   building modules, stage 2.   modpost 1 modules   cc      /home/dave/kernel_modules/k10temp/k10temp.mod.o   ld [m]  /home/dave/kernel_modules/k10temp/k10temp.ko make[1]: leaving directory `/usr/src/linux-headers-2.6.28-15-generic'

after run install script...

code:

sudo sh install.sh

now reboot machine...

after reboot open terminal , type...

code:

lsmod | grep k10temp

you should have this:

code:

k10temp                10880  0

if not, module isn't running , need add following line /etc/modules reboot.

code:

#k10 amd temp module k10temp

this insert module @ boot if system didn't automatically you.
in sensors applet should have cpu temp... yay

Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware [ubuntu] No CPU temps in sensors-applet

Ubuntu