Skip to main content

Thread: RTL8187B + ndiswrapper 64 bit


i've been stuck issue months. open source driver rtl8187 has low transfer rate , when transfer files max speed of 300kb/s , if ping router 300ms or so.

haven't been able install 64bit driver using ndiswrapper because computer hangs when so.

here's ouput of lsusb:

code:
$ lsusb  bus 001 device 002: id 0bda:8189 realtek semiconductor corp. rtl8187b wireless 802.11g 54mbps network adapter
any ideas on how solve this?

thanks!

i having same problem same 0bda:8189 device built toshiba laptop - open source driver goes @ 300-500 kb/s when few feet access point.

far have tried:

- different access points see if issue wireless router. access points suffer low speeds.

- turning wpa2 off see if encryption issue (it not).

- ndis wrappers + available windows drivers available rtl8187b chipset @ realtek.com. loaded did not recognize device being present.

- ndis wrappers + windows driver hacked .inf file include 8189 code. driver loaded , said device present checkbox enabling wireless in control gui remained unavailable.

after reading http://ubuntuforums.org/showthread.p...light=rtl8187b rtl8187 id 8197 going try following well:

a) force rate 5 mb/s.

b) request linux driver id realtek via email.

i'll report on whether anywhere. sorry can't offer instant answers i'd glad hear of others find.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless [ubuntu] RTL8187B + ndiswrapper 64 bit


Ubuntu

Comments

Popular posts from this blog

Convierte tu Raspberry en un NAS. Firmware fvdw-sl 15.3 - Raspberry Pi Forums

How to format a Get Request

avrdude: verification error, first mismatch at byte 0x0000 0x0c != 0x62