difficulty with SATA and IDE as USB drives - Raspberry Pi Forums

-

i setup raspberry pi file server - installed old compaq pc case , power supply feed 5v power device 2 wd harddrives, 1 sata, 1 ide, using tow usb adapters connect usb ports of pi.

however, although sata drive works /dev/sda, ide 1 not stable. @ 1 point, showed /dev/sdb, dissappeared after mounted case - strange. :roll:

have tried different options in jumper settings (master, slave, single, cs), have yet find stable combination both accessible.

insight appreciated !

bfz

maybe need different ide->usb adaptor? http://elinux.org/rpi_verifiedperipherals

when usb hd 'disappears', check see error messages appear @ bottom of 'dmesg' output.


raspberrypi



Comments

Post a Comment

Popular posts from this blog

Convierte tu Raspberry en un NAS. Firmware fvdw-sl 15.3 - Raspberry Pi Forums

-
¿conocéis este proyecto? fvdw-sl 15.3 para raspberry pi. convierte la raspi en un nas. http://plugout.net/viewtopic.php?f=31&t=1880 llevo tiempo intentando encontrar la forma de hacer que una de mis raspberry se comporte como un nas. configurando samba, minidlna, transmision, ftp, nfs, etc. pues con esta distribución lo tengo todo hecho. lo instalé ayer y me tiene soprendido. ahora mi raspi es un nas, hecho y derecho. caracterísitcas. - interfaz web. que cambia en función de si eres el administrador o un usuario. - gestión de usuarios. puediendo dar distintos permisos carpetas y funciones. - gestión de carpetas - vpn - ftp - nfs - webdav - varios servidores dlna como minidlna, townky, etc - varios gestores de descarga como transmision, mldonkey, etc - gestión de periféricos usb como impresoras o webcam. - gestión de cron para automatizar procesos. - creo que se basa en arch linux. por cierto, estoy creando una tarea para que me exporte un archivo txt del dis...
Read more

How to format a Get Request

-
i have external server running mysql. have installed php script that, when accessed http deliver data 1 of tables. works fine browser: code: [select] http://www.seti.net/php/getevents.php i cannot figure out how send command arduino. have ethernetclient library working , can access google in example. when send command through client: code: [select] client.println("//get /php/getevents.php http/1.0"); the server returns: code: [select] </head><body> <h1>method not implemented</h1> <p>get /php/getevents.php not supported.<br /> what correct way format in arduino? i use send temperature web server. note lack of http version , additional blank line after - not sure whether difference important works: code: [select] void  sendtemptoserver() { char getrequest[80]; if (client.connect(server, 80))   {   sprintf(getrequest,"get /cgi-bin/arduino.cgi?reading=%s&arduino_id=23&sensor_id=1",t...
Read more

avrdude: verification error, first mismatch at byte 0x0000 0x0c != 0x62

-
hello, im confused uno r3, uploaded code quite few months in uno, working fine. now without having altered of circuits, trying upload code changes,im getting strange error "avrdude: verification error, first mismatch @ byte 0x0000          0x0c != 0x62" i tried research able solve issue,  im running kind of fuse bit being changed or clock speed altered, im pretty sure did not play around these items. any people, please . . thanks taz Arduino Forum > Using Arduino > Installation & Troubleshooting > avrdude: verification error, first mismatch at byte 0x0000 0x0c != 0x62 arduino
Read more